Tel: 0161 351 6545
Anchor Rubber Stencil Tape
Rubber Based (Anchor) Tapes are an American stencil tape, usually supplied on a 10 yard roll
Recommended Smart Knife: Summa HSK750R / Roland MSK750R / Graphtec GSK15R - Cutting Force: 160-220gms (Depending on ambient temperature).
ANC 116
This tape was originally designed to be used on untreated wood. On visiting the USA on a trip to the Anchor factory we saw this tape and realised it's potential for the stone industry. It has since become the most popular individual anchor product. It is a sprocketed tape suitable for use on most plotters, the sprockets fit the Gerber plotter, Can still be used on Friction plotters.
Recommended Smart Knife: Summa HSK750R / Roland MSK750R / Graphtec GSK15R - Cutting Force: 160-220gms (Depending on ambient temperature).
ANC 155
Following the success of the 116 tape Anchor released this tape to target the friction fed plotters. It is identical to the 116 but has no holes in the liner. The tape comes in the more familiar 20” and 24” widths suitable for most friction feed plotters.
Handcut only stencil...
ANC 125
Hand-cut, high quality, durable stencil coated with an advanced, high tack, water-based, pressure-sensitive, acrylic adhesive protected by an easy-release blue liner. #125 is designed and recommended for raw/unfinished wood, HDU foam-board, brick and rough stone. Not intended for use on marble, granite, or polished surfaces.
Recommended Smart Knife: Summa HSK750F / Roland MSK750F / Graphtec GSK15F - Cutting Force: 160-220gms (Depending on ambient temperature).
ANC T226
T226 is Anchor's answer to the cheaper PVC based tapes and can be cut by a laser. It is also plotter friendly and can be cut by hand - comes with a paper backing material.